Underground Cable Fault Locator for Tracing and Pinpoint Power Cable

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Year
• Model NO.: HZ-B
• Connectors: USB
• Test Mode: Point Test
• Usage: Network Cable Tester
• Test Region: Forming Cable
• Cable Type: Shielded
• Power: Electricity
• Certification: CE
• Customized: Customized
• Color: Grey
• Place of Origin: Hebei, China (Mainland)
• Brand Name: Hz
• Model Number: Hz-8000
• Blind: 2m
• Working Range: 30km
• Resolution: Low-Voltage Pulse Mode 1m; Pulse Current Mode 4m
• Certificate: CE ISO
• Sampling Frequency: 100MHz.
• Measuring Mode: Low-Voltage Pulse, The Pulse Current
• Transport Package: Wooden Box with Foam Inside
• Specification: CE/ISO/IEC
• Trademark: HuaZheng
• Origin: Hebei, China
• HS Code: 9030899090
• Production Capacity: 100 PCS/Month
• Package Size: 54.00cm * 38.00cm * 38.00cm
• Package Gross Weight: 12.000kg

Product Description

Underground Cable Fault Locator For Tracing and Pinpoint Power Cable

Overview

Cable faults pin-pointer is used for pin-Pointing kinds of cable faults of underground Power cable by using acoustic and magnetic method. by means of Electronic flashover generates by the impulse generator. Magnetic sound signal of the electronic flashover wave is picked up and amplified through the probe, and judged by auditory and visual to accuracy find out the underground cable faults.

 

Technical Data

Synchronous receiving sound wave and electromagnetic wave during fault point discharge, use for confirm cable location of fault point.
Magnification	50,0000 times
Working voltage	±9V±20%
Static current	<10mA
Power dissipation	Quiescent current is less than 10mA, The working current is not more than 10mA
Output impedance	350Ω
Positioning accuracy	±0.2m

 

Precise point operation procedure

When you are close to the point of failure, please follow the sequence of procedures below

Steps	Action
1	Place the HZ-B ground-penetrating microphone in the starting position.
2	If HZ-B cannot pick up any sound signal at this measuring point. Please follow the path of the cable under test. When you find that HZ-B receives the first useful impact discharge sound signal, the left side of the LCD of HZ-B host will automatically display the sound level of the measurement point. If you are unable to pick up the shock discharge sound signal through a ground-penetrating microphone or headphones in a long area, you should try to make a precise point from the starting point in the opposite direction.
3	Please continue to follow the path of the cable under test and move one step at a time. If necessary, adjust the position of the central axis of the cable under test at any time. At each measurement point, please stay a few impulse discharge pulse signals. When you are near the cable fault point, you will hear a stronger knocking sound, and the sound level of the current measurement point displayed by HZ-B will suddenly increase.
4	Please rotate the HZ-B ground-penetrating microphone 180 ° and use a smaller step to approach the fault point again.
5	Please continue to reduce the step distance, look for the place where the fault is the loudest, and determine the location of the fault point as accurately as possible. Then make an accurate mark on the ground.

 

 

Company Information

HuaZheng Electric Manufacturing (Baoding) Co.,Ltd is the supplier of the State Grid in China.It means we are the supplier of the Chinese Government.And our products spread throughout the whole China.

What's more, our customers come from different countries like America, England, Bulgaria, Brazil, Chile, Malysia, Vietnam and so on.

Our main products are Insulation Oil Tester, Cable Fault Locator, Power Quality Analyzer, High Voltage Generator, High Voltage Capacitor, Testing Transformer and so on.

Customer Visit



Exhibition

Similar Recommendation