I. Overview
1. Purpose
The HZDL-1000III three-phase high current generator (referred to as three-phase
current regulator) is a testing equipment independently developed by our company.
It combines the advantages of similar products at home and abroad, adopts CNC
technology, and has strong anti-interference ability. Compared with the previous
generation of current regulators, it has the advantages of large output power, small
size, and light weight due to the use of low-power, large capacity self coupled
voltage regulators and converters made of high permeability iron cores. Mainly used
for thermal relays, motor protectors, contactors, circuit breakers, air switches,
switchgear, circuit breakers, and protection screen calibration.
2. Performance characteristics
Adopting beautiful and elegant PVC panels
Directly display the primary current for easy observation and recording during
testing.
High measurement accuracy of 0.5 levels
High power, small size, and strong load capacity
Small in size and light in weight, the volume is only 30% to 70% of that of similar
products, making it very convenient to carry.
3. In terms of operation
(1) After wiring is completed, it should be checked again to see if there are any
wiring errors and if the connectors are in good contact.
(2) During the testing process, if there is any ignition or any abnormal phenomena
such as no display during startup, the power should be immediately turned off and
the wiring should be rechecked.
(3) In actual wiring, the current output terminals should form a loop, otherwise
the instrument will not output current.
(4) This converter comes with a random output wire; The output external copper wireshould be selected according to 10A/mm2. (Standard configuration includes two
3-meter test lines)
(5) The capacity of this device is designed for a short duration of 5 minutes. If
used for batch testing, the working time should be less than 2.5 minutes. Wait for
10 minutes before proceeding with the next work. If conducting temperature rise (30
minutes to 24 hours), it should be prepared according to long-term working
temperature rise.
II, Technical features
1. Name and classification
(1) Name: HZDL-1000III High Current Generator.
(2) Environmental group: belongs to Group III instruments in GB6587.1-86 "General
Principles of Environmental Testing for Electronic Measuring Instruments" (which
can be used in outdoor environments).
2.1 Input voltage: AC 380/220V 50Hz three-phase four wire
2.2 Power: 10KVA 1 * 3 pieces
2.3 Output current: AC0~1000IIIA stepless adjustable, panel with digital display
ammeter
2.4 Output voltage: 10V
2.5 Output waveform: The output current is a standard sine wave with small burrs,
which is better than the required indicators of the power system. The ripple
coefficient is less than or equal to 0.3%. Standard sine wave.
2.6 Measurement accuracy: (using 0.2S grade materials) Actually around 0.3; Each
current can be smoothly, steadily, and continuously adjustable, with an accuracy
higher than 0.5 level. The current and voltage meter displays true and effective
values, with high accuracy and stability.
2.7 Output current mode: True RMS continuously adjustable;
2.8 Current stability: 0.2%
2.9 Structural form: integrated
2.10 Wiring method: According to requirements
2.11 Current stability: 0.2%;
2.12 Protection settings: overcurrent and overvoltage
2.13 Time: 0.01S-999.999S
Packing list
|
No |
Name |
Qty |
|
1 |
Test line 3 meters |
12 |
|
2 |
Test line (1 square) |
6 |
|
3 |
Ground wire |
1 |
|
4 |
Zero line |
1 |
|
5 |
power cable |
1 |
Audited Supplier 
){kind=link}